Inline Flex
An automatic inspection solution for foils or boards
Our Inline Flex solution is our automatic solution for a wide array of applications. The system is design to handle foils on carriers, foils in boxes or rigid circuit boards. The inspection would inspect substrates for excess paste, missing paste, smearing, narrowing, mouse bites, holes, via covering, sprayers, bleeding of paste, contamination, print shifts, substrate shrinking, screen aging, etc, and it differentiates between random and serial defects.
The materials that are inspected are usually conductor materials (like silver or silver palladium), resistor paste, cover glass, adhesives, gold, etc., and it detects all defects that are relevant in modern fine line screen printing. The tendency goes to even finer structures. On prints with less than 50 µm line widths, inspection with the human eye is not possible or very unreliable. The STRATUS VISION AOI systems can inspect a 10” x 10” substrate in less than 10 seconds and find defects between 0.2µm and 30µm (depends on pixel size).
Length x Width x Height: 1687 mm x 1600 mm x 2130mm
Weight: 1400 kg
Color: RAL 9003
Welded Steel frame
Granite base
Flexible Monitor arm
Voltage: 110V AC to 240V AC
Current: 4.8 Amps to 2.2 Amps
Frequenzy: 50 to 60 Hertz
Network: Ethernet RJ45
Air: 6 bar
Air consumption: 40l / min
Camera: Areascan, Linescan and 3D
Resolution: 1µm to 15µm
Lens: Telecentric, Bicentric
Operating Temperature: 18.5°C +/- 8.5°C
Operating Humidity: 50% +/- 25%
Power Consumption: 0.5kW average