Stratus III
Manual Inspection solution for most product types
The Stratus III is our manual solution to automated inspection of most kinds of products. Defect types range from excess paste, missing paste, smearing, narrowing, mouse bites, holes, via covering, sprayers, bleeding of paste, contamination, layer shifts, substrate shrinking, screen aging, etc.
The materials that are inspected are usually conductor materials (like silver or silver palladium), resistor paste, cover glass, adhesives, gold, etc., and it detects all defects that are relevant in modern fine line screen printing or thin film applications. The tendency goes to ever finer structures. On prints with less than 50 µm line widths, inspection with the human eye is not possible or very unreliable. In Thin Film applications the strain and difficulty of inspection has m ade automated inspection solutions a basic requirement. The STRATUS VISION AOI systems can inspect a 10” x 10” substrate in less than 10 seconds and find defects between 0.2µm and 30µm (depends on pixel size).
Length x Width x Height: 1445 mm x 830 mm x 2548 mm
Weight: 850 kg
Color: RAL 9003
Welded Steel frame
Granite base
Flexible Monitor arm
Camera: Areascan, Linescan and 3D
Resolution: 1µm to 15µm
Lens: Telecentric, Bicentric or
Camera: Areascan, Linescan and 3D
Resolution: 1µm to 15µm
Lens: Telecentric, Bicentric
Operating Temperature: 18.5°C +/- 8.5°C
Operating Humidity: 50% +/- 25%
Power Consumption: 0.5kW average